CUTTING EDGE BULLETS
Our bullets employ a hollow point design that holds together well if bone is hit yet expands rapidly when bone is not hit causing massive amounts of damage. They also have a very special, patented, characteristic that we call a SealTite™ Band. This feature is the key to our bullets ability to seal the bullet into the rifle barrel grooves. Doing this prevents blow-by in all but the most worn out barrels. Typically, this does not happen with other solid copper bullets because copper does not upset, or expand, when fired to seal in the barrel as jacketed bullets are capable of doing.
Although this new technology may seem a little scary our testing has proven it to be safe if proper reloading procedures are followed. We recommend starting 10% below reloading manual data published by a reputable source and working up to reach your desired pressure/speed. If done correctly, you should easily be able to develop a load that produces the same speeds as other bullets of equal weight and sometimes with reduced charges due to the effects of truly sealing the bullet in the barrel. Pressure/fouling reducing grooves aid in further reducing pressure and fouling on bullets with these grooves but with some reduction in BC at very long ranges.
